Previewing - Canon FS 3.6 User Manual

Previewing

Once you have inserted the film, selected a film and image type and adjusted the
resolution settings, preview the image and specify the scan area.
Settings Display Area
Displays the selected image type, scan
resolution, output resolution, output
magnification, image file size, film type
and ColorGear settings, as well as the
free disk space on the target drive.
Once the preview scan commences, the preview image will begin to display in the
preview window.
• Changes in categories, such as image type and brightness, are reflected
immediately in the preview window. However, the preview image is only an
approximation of how the final image will appear.
• A message similar to [Initializing film scanner. Please remove film.] will
display if the film scanner's power is turned on with a film already inserted
or if a set period of time passes without the scanner being operated after
the power is turned on. If this happens, remove the film from the scanner
and follow the instructions on the screen.
Step 2 • Scanning
Preview Window
Progress Bar
The scan's progress is indicated by the
length of the bar and a percentage
figure to the right. To stop the preview
scan, click the [Cancel] button.
37