Testing The Scanner - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX

Testing the Scanner

The Test Scanner button performs any diagnostic tests the scanner can
perform. Before you begin, make sure the scanner is turned on and in a ready
position. For a flatbed scanner, make sure the document cover, or optional
document feeder is closed, flat on the document glass.
To test the scanner:
1. On the Device page, click Test Scanner. The Scanner Diagnostics dialog box
appears.
2. On the Scanner Diagnostics dialog box, click Start. After a short pause, you
should hear the scanner start to run its diagnostics.
When the test is complete, a message in the Scanner Diagnostics dialog
box informs you of the results.
Chapter 4
Scanning Devices
53
53