Scanning With The Automatic Document Feeder - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX

Scanning with the Automatic Document Feeder

To scan using the Automatic Document Feeder:
1. Make sure the automatic document feeder is set up. Use the previous
procedure to ensure that the ADF is installed correctly.
2. Insert the paper to be scanned in the document tray, printed side up, and
upper edge first. Align the paper according to the paper alignment marks
on the document tray.
3. Start the application from which you want to scan.
4. Select the source device.
5. Select the Acquire command in the acquiring application.
6. If the ScanGear CS-S window opens, click the device tab for the scanner
you are using.
7. On the Image Source list, select Document Feeder.
8. Change any other settings on the ScanGear CS-S window. For example, if
the acquiring application is an OCR application, make sure the OCR 300
dpi setting has been selected as the Scan Resolution on the Main tab.
Chapter 4
Scanning Devices
56
56