Canon CanoScan FB 1200S User Manual page 54

CONTENTS
GLOSSARY
INDEX
3. Click Close.
4. If there are any errors reported during the test, use your scanner's
documentation to troubleshoot the problem.
Setting the Lamp Save Feature
The "Shut off lamp time" option turns off the lamp of the FB1200S to save
power if it remains idle for a specified length of time. Click the up or down
arrows in the spinbox to increase or decrease the time limit in units of
minutes. You can select a time within the range of 10 to 59 minutes. This
setting is automatically set to 10 minutes when ScanGear CS-S is installed.
Chapter 4
Scanning Devices
54
54