Canon CanoScan FB 1200S User Manual page 18

CONTENTS
GLOSSARY
INDEX
Clear, Preview and Scan Buttons
The Clear, Preview and Scan buttons control the scanner. When you click
Clear, the image displayed in the preview area is cleared. When you click
Preview, the image on the scanner is scanned into the preview area but not
yet saved in the acquiring application. When you click Scan, the image
displayed in the preview area is scanned and sent to the acquiring application.
For details, see
Toolbar
The toolbar has a set of tools that let you change the previewed image's
shape and size. You can rotate the image, select a part of the image, zoom in
and out, create a negative image, flip an image, and turn rulers on and off.
For full details on these tools and their functions, see
Image Shape and Size,"
Status and Message Areas
The status area at the bottom of the ScanGear CS-S window summarizes the
color mode, resolution, width and height, and the estimated file size of the
currently previewed image when it is acquired by the application. For more
information on estimating file sizes, see
The message area on the lower left of the window displays messages related
to the preview area and toolbar.
Settings Tabs
Each tab (Main, Tone, Preferences, and the device tab) contains settings that
let you modify the acquired image.
For information about the settings on the Main tab, see
Resolution, and Dimensions."
tab, see
settings, see
FB1200S tab, see
"Previewing an Image,"
later in this chapter.
For information about the settings on the Tone
"Setting Image Tones."
"Setting General Preferences."
Chapter 4, "Scanning Devices."
later in this chapter.
"Changing the Preview
Chapter 5, "Scanning Techniques."
For information about the Preferences tab
For information about the
Chapter 3
Scanning
"Setting Scan Mode,
18
18