Scanner Settings - Brightness; Scanner Settings - Scale; Scanner Settings - Use The Scanner Driver To Make Advanced Settings - Canon CanoScan N1240U Manual

Chapter 2
Using the Toolbox

Scanner Settings - Brightness

You can adjust the brightness by dragging the tab left or
right. Moving it left darkens the image and moving it
right brightens it.
f
Note
• This category sets the threshold value for black and white
when the Black and White option is selected in the Image
type category.

Scanner Settings - Scale

This setting allows you to expand or reduce the size of an
image for printing to fit the paper specified in the Paper
size category.
Fit to paper:
Automatically adjusts the size of the entire printed
image to fit the size of paper specified for printing.
Since it cannot change the width-to-height ratio, it
may leave a white space on the sides or top and
bottom of an image if the original item and the
printing paper have different shapes.
100%:
Prints the image at the original size of the item.
w w
Contents Index
15
Copy Settings (3/5)
Scanner Settings - Use the Scanner Driver to Make
Advanced Settings
If this setting is left unchecked, clicking the [Copy] button
at the dialog's bottom right starts the scan immediately. If
a check mark is placed beside the setting, clicking the
[Copy] button displays the ScanGear CS-U window,
allowing you to adjust various settings in detail. The
Image type,Image quality, Paper size, and Brightness
settings cannot be set via the Toolbox when a check mark
is placed beside this setting. Set these settings in the
ScanGear CS-U window.
f
Note
• If you place multiple photos on the document glass and
use the Multi-Photo Mode setting in the ScanGear CS-U
window, the images will be scanned as a single
composite image by the Toolbox Copy function.
Previous View Next View Previous Page Next Page