Scanning Multi-Page Documents; Using The Automatic Document Feeder (Adf); Connecting The Automatic Document Feeder - Canon CanoScan FB 1200S User Manual

CONTENTS
GLOSSARY
INDEX

Scanning Multi-Page Documents

If you use a flatbed scanner, you can scan and acquire many pages of
documents at a time. ScanGear CS-S has settings to support the use of the
automatic document feeder (ADF). When you have an automatic document
feeder attached, ScanGear CS-S controls the feeder during the scan.

Using the Automatic Document Feeder (ADF)

Use the following steps to have ScanGear CS-S scan multiple documents
using a document feeder. For details on loading the document feeder, see its
documentation.

Connecting the Automatic Document Feeder

The Automatic Document Feeder replaces the document cover on a flatbed
scanner. You must remove the document cover and replace it with the ADF,
and attach a connector plug.
To connect the Automatic Document Feeder:
1. Remove the document cover from the scanner and set aside in a safe place
where the inside document cover will not be scratched.
2. Disconnect the power cord.
3. Insert the hinges of the ADF in the scanner and make sure the ADF is
securely seated.
4. Plug the adapter cord in the Options port on the back of the scanner.
5. Reconnect the power cord.
6. Turn on the scanner. You should hear the ADF initializing.
7. Turn on your PC.
Now you are ready to scan.
Chapter 4
Scanning Devices
55
55