Scanning For Equipment Codes - Dish Network 6.3 User Manual

Instructions
5
Enter one of the three-digit
equipment codes from the
table using the number
buttons.
6
If you want to program
Limited Mode, press 1.
If not, skip to step 7.
7 Press POUND (#).
8 Press POWER to turn off
the equipment. If the equip-
ment does not turn off, go
to step 10.
9
Turn the equipment back
on and try some other but-
tons to make sure they
work. If the code works for
other buttons, stop here.
10
If the code doesn't work,
repeat steps 3 through 9
with another equipment
code from the tables.
11
If you can't find a code that
works, try Scanning for
Equipment Codes that
follows.
S
CANNING FOR
Instructions
1
Turn the equipment on.
E
QUIPMENT
Additional Information
The three-digit equipment code
should be for the brand name of
your equipment that you found
in step 2.
See Limited Mode on page 3 for
more information.
If you entered the code
correctly, the mode button
flashes three times.
If the code works, the
equipment should turn off.
For example, sometimes
POWER works when other
buttons don't.
Try every code listed for your
brand until one works for your
equipment.
C
ODES
Additional Information
Use the equipment's front panel
buttons or its remote control.
4