Entering Equipment Codes - Dish Network 176842 User Manual

Instructions
10 If the code worked for
other buttons, select Yes
and continue with step 11.
If the code did not work,
select No and repeat steps
6 through 9 for the next
code for your brand.
11 On the Home screen,
confirm that the device's
brand name you found in
step 5 is in parentheses
after a four-digit code.
12 OPTIONAL—For setting
up a TV2 remote: Select
Auto Tune from the
Remote Control settings
screen to manage this
feature. NOTE: This is not
an active feature.
13 If you wish to change the
device used to control
audio volume: Select the
Volume option from the
Remote Control settings
screen and follow the steps
in Switching Between TV
and Amplifier Volume Con-
trol on page 8.
E
NTERING
Instructions
1
Turn your equipment on.
E
QUIPMENT
Additional Information
Choose the code that provides
the remote with support for the
most device functions. If you
wish to verify the support of
volume and mute functions, go
to step 13.
You can program the remote to
control your TV in TV mode
and other devices in DVD and
AUX modes. Repeat these
instructions for each mode.
Auto Tune is a feature to help
keep a TV2 tuned to satellite
programming. When enabled,
pressing the SAT button on a
linked TV2 remote tunes that
TV automatically to a specified
channel or input (source).
If you have connected your
ViP922 DVR receiver's audio
output(s) to an audio amplifier
or A/V receiver, then you may
want to change which device
controls volume and mute from
the default of the TV to one of
these AUX devices you have
programmed in AUX mode.
C
ODES
Additional Information
Use your equipment's front
panel buttons or its own
original remote control.
5