Quick Setup; Making The Remote Work With Your Receiver - Dish Network 6.3 User Manual

Making the Remote Work
With Your Receiver
If you installed one of these keys,
continue with
2
UHF
PRO
1
UHF
PRO
UHF
PRO
If you installed a UHF
key, make sure the
UHF antenna is
installed on the back
of the
receiver.
4
Confirm that you
see the System
Information screen.
Confirm that your remote operates your
receiver by pressing remote buttons. If
your remote has a blue number 2 key, you
may need to go to your remote TV2 location to
confirm your remote operates your receiver.
If this is not working, go back to

Quick Setup

step 2 on this page.
1
UHF
2
6
4
1
If you installed this
key, go to
inside this guide.
Green
(not black)
Turn your receiver and
TV on, and press SYSTEM
INFO on the front
of the receiver.
RECORD
Press RECORD on
your remote. The remote
address will probably
change on the screen.
C-3
page 11
UHF Pro Symbol
1
UHF
PRO
3
5
step .
5