Axis Ip Utility - Axis 27147R1 Installation Manual

Page 8

AXIS IP Utility

AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually set a static IP address. AXIS IP Utility is available on
the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup
Note that you must install the AXIS 225FD on the same network segment (physical subnet) as
the computer running AXIS IP Utility.
Automatic discovery
1. Check that the AXIS
225FD is connected to the
network and that power
has been applied.
2. Start AXIS IP Utility.
When the AXIS 225FD
appears in the window,
double-click it to open the
camera's home page.
3. See page 13 for
instructions on how to set
the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your com-
puter is connected to.
2. Click the button
serial number and IP address for the AXIS 225FD. The serial number is
located on the product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page to access the AXIS 225FD web pages.
5. See page 13 for instructions on how to set the password.
Notes:
Set the IP address using IP Utility within 2 minutes of starting the camera.
AXIS IP Utility can be used to change a dynamically set IP address to a static one.
Set IP address using serial number and enter the
AXIS 225FD Installation Guide
Single camera / small installations