Axis Ip Utility - Single Camera/Small Installation; Automatic Discovery - Axis 215 Installation Manual

AXIS 215 PTZ Installation Guide

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The
application can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment
(physical subnet) as the AXIS 215 PTZ.

Automatic discovery

1. Check that the AXIS 215 PTZ is connected to the network and that power has been
applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 13 for instructions on how to set the password.
Assign the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select the AXIS 215 PTZ in the list.
3. Click the button
address.
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the camera's web pages.
6. See page 13 for instructions on how to set the password.
Assign new IP address to the selected device and enter the IP
Page 11