Completing The Installation - Axis 27147R1 Installation Manual

AXIS 225FD Installation Guide
7. Go to the Basic Configuration menu in the Web interface and select Focus. Follow the
on-screen instructions to set the focus.
8. After determining the zoom and focus, lock the zoom puller and the focus puller in
position by rotating the screws clockwise.
Note:
The image can be fine-tuned for low lighting conditions.
Go to 'Setup > Video & Image > Advanced' and refer to the help files for more information.

Completing the installation

1. Check that the safety cord is attached to the hook to prevent the dome casing from fall-
ing off the unit casing during the installation process. Be careful not to damage the dome
or scratch the glass.
2. Rotate the black protective shield inside the dome to match the camera's position.
3. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower
to remove dust from the lens.
4. Replace the dome casing and tighten the tamper-proof screws using the allen key. The
installation is now complete.
Page 15