Axis Ip Utility - Axis 210 Quick Installation Manual

UPnP™
UPnP™ functionality is enabled by default in the AXIS 210/211. If also enabled on your
computer (Windows ME or XP), the camera will automatically be detected and a new icon will
be added to "My Network Places." Click this icon to access the AXIS 210/211. See page 7 for
instructions on how to set the password.
Notes:
• To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select
Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services
section. Click Details and then select UPnP as the service to add.
• Once the AXIS 210/211 is accessible from your computer, it is then possible to use the One-click
installation method to provide the camera with a DNS name. See the previous page.
UPnP™ is a certification mark of the UPnP™ Implemented Corporation.

AXIS IP Utility

AXIS IP Utility is a free Windows
application that discovers and displays
Axis devices on your network. The
application can also be used to
manually set a static IP address. AXIS
IP Utility is available on the CD supplied with this package.
Automatic discovery
1. Check that the network and power cables are connected to the AXIS 210/211.
2. Insert the CD into your computer's CD drive.
3. Start AXIS IP Utility. When the AXIS 210/211 Network Camera appears in the window,
double-click it to open the camera's home page.
Set the IP address manually
1. If the AXIS 210/211 Network Camera does not appear in the window, click the Refresh
button to try again. If the camera still does not appear, you can set the IP address
manually. Acquire an unused IP address on the same subnet as your computer.
2. Click the button "Set IP address using serial number" and enter the serial number (see
page 3) and IP address for the AXIS 210/211. Follow the on-screen instructions.
Note:
After using the AXIS IP Utility, the One-click installation method can be used to obtain a DNS name for the
AXIS 210/211.