Resetting To The Factory Default Settings; More Information - Axis 27147R1 Installation Manual

Page 16
Accessing the AXIS 225FD from the Internet
Once installed, your AXIS 225FD is accessible on your local network (LAN). To access the
camera from the Internet, network routers must be configured to allow incoming traffic, which
is usually done on a specific port. Please refer to the documentation for your router for further
instructions.
For more information on this and other topics, please visit the Axis Support Web at
www.axis.com/techsup

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the control button pressed until the Power Indicator flashes amber (this may take up
to 15 seconds).
4. Release the control button.
5. When the Power Indicator displays green (which can take up to 1 minute) the process is
complete and the camera has been reset.
6. Re-install the AXIS 225FD using one of the methods described in this document.

More information

Please refer to the help files and the user's manual for information on the functionality of the
AXIS 225FD. The AXIS 225FD User's Manual is available from the Axis Web site at http://
www.axis.com or from the Axis Network Video Product CD.
AXIS 225FD Installation Guide