Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axis 27323R1
Summary of Contents for Axis 27323R1
- Page 1 AXIS Installation Monitor User’s Manual...
-
Page 2: Main Window
Note: AXIS Installation Monitor will show only Axis network cameras and video servers. Main window AXIS Installation Monitor has two modes: List and Monitor. List mode displays all Axis network cameras and video servers found on the LAN. Devices are listed by name, IP address, Status and Serial number. -
Page 3: Main Menu
DHCP and there is no DHCP server responding. No Network will appear if there is no network connection. • Screen Resolution - The current resolution setting. Application Settings - Enter the default settings for AXIS Installation Monitor. Tap on OK when done. - Page 4 AXIS Installation Monitor - User's Manual • Monitor Mode - Choose Enable from the drop-down list to start AXIS Installation Monitor in live view mode. When Disabled the application starts in Main window mode. The Monitor window closes automatically when camera is disconnected.
- Page 5 See also: Monitor window Single camera setup 1. Using a crossover network cable, connect your Pocket PC to the AXIS network camera or video server. 2. Tap on menu Devices > Refresh or press the center of the navigator button. The...
- Page 6 AXIS Installation Monitor - User's Manual 3. If the network camera uses a different user name and password than the Master Credentials, tap on the camera in the list and choose Device > Enter Credentials. Enter the camera's User Name and Password. Uncheck Use Master Credentials and tap OK to close the dialog.
- Page 7 AXIS Installation Monitor - User's Manual • Auto iris should be turned off for best focus adjustment. To avoid damage to the camera after focusing, do not forget to turn on the auto iris again.
Need help?
Do you have a question about the 27323R1 and is the answer not in the manual?
Questions and answers