Dish Network Duo ViP 222 User Manual page 71

Hdtv satellite receiver
Hide thumbs Also See for Duo ViP 222:
Table of Contents

Advertisement

Setting Up Using Device Code Tables
Set up the remote to control other devices using the device codes listed on page 118. In
the instructions below, the column on the left contains the instructions and the column on
the right provides additional information.
Instructions
1
Turn the device on.
2
Find the brand name of the device in the
tables starting on page 119.
3
Press and hold the mode button until all the
mode buttons light up, and then release the
device mode button. The button flashes.
4
AUX
For
mode only. Press 0 for a TV, 1 for
a VCR, or 2 for a tuner or amplifier.
5
Enter one of the three-digit device codes
from the table using the number buttons.
6
If you want to program Limited Mode, then
press 1. If not, then skip to step 7.
7
POUND
Press
(#).
8
POWER
Press
to turn off the device. If the
device does not turn off, skip to step 10.
9
Turn the device back on and try some other
buttons to make sure they work. If the code
works for other remote buttons, stop here.
10
If the code doesn't work, then repeat steps
3 through 9 with another device code from
the tables.
11
If you can't find a code that works, then try
the section, Setting Up Using Device Codes
Scan, that follows.
Remote Controls
Controlling Other Components
Additional Information
Use the device's front-panel buttons or its original
remote control.
If your device brand isn't listed, see Setting Up Using
Device Codes Scan on page 64.
For example, for a TV, hold the
all of the other device mode buttons light. When you
let go of it, the TV mode button will start flashing.
AUX
If you're not programming in
step 5.
The three-digit device code is for the brand name of
your device that you found listed in step 2.
See Limited Mode on page 62 for more information.
If you entered the code correctly, then the device
mode button flashes three times.
If the selected code works, the device should turn
off.
POWER
Sometimes
works when other buttons
VOLUME
don't. If in Limited Mode, try
Try every code listed for your device brand until one
works for your device.
TV
mode button until
mode, then skip to
MUTE
or
.
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents