Dish Network Duo ViP 222 User Manual page 11

Guide Conventions
• The names of remote control buttons are all uppercase.
Example: Press SAT.
• Select means to move the highlight to an on-screen option or choice in a list and press
SELECT on the remote control.
Example: Select the Locks option.
• This guide uses HD for high definition and SD for standard definition.
• Where this guide mentions the nearby TV, it is referring to TV1, the TV nearest the receiver.
The nearby TV receives TV1 menus and programming from the receiver's TV1 outputs and is
connected using short audio/video cables.
• Where this guide mentions the remote TV, it is referring to TV2, the cable-ready TV(s) located
in a room away from the receiver. The remote TV receives TV2 menus and programming from
the receiver's TV2 outputs through your in-home cable system.
• Where this guide mentions the remote control, it refers to either Remote Control 1 when
viewing a nearby TV or Remote Control 2 when viewing the remote TV(s). If a specific remote
control must be used, this guide will refer directly to Remote Control 1 or Remote Control 2.
• The instructions in this guide are shown in two ways:
– Instructions in the form of pictures are handy if you'd like to learn something quickly.
These instructions are numbered left to right as shown in the sample below.
– Instructions that are written out are helpful if you'd like to learn more details.
Tips and Questions
At then end of most chapters, you'll find two important sections that are there to give you additional
information:
Tips that let you in on secrets of using your satellite TV system more efficiently.
Answers to Questions you might have about the features described in the chapter.
Introduction
How to Use this Guide
3