Dish Network Duo ViP 222 User Manual page 122

Reference
Troubleshooting Tables
Timers
What Is Happening
You try to set up an event timer
and the receiver displays a
message noting that the
program is locked.
You try to set up an event timer
and the receiver displays a
message noting that the
program is a Pay-Per-View
event.
You try to set up an event
timer, but the receiver displays
an Error message giving you
the option to delete an event
timer that was set up earlier.
You set up an event timer, but
the receiver does not tune to
the channel of the program, or
does not record the program.
You set up an event timer for a
program that is repeated (such
as a regularly scheduled
program), but the timer does
not operate for a showing of
the program.
You set up an event timer, but
the timer does not operate at
all.
You stop the operation of an
event timer for one showing of
a program that is repeated
(such as a regularly scheduled
program), but the timer
operates for the next showing.
You edit an automatic event
timer. The timer does not start
or does not end according to
the program for which you set
the timer.
You try to set up a manual
event timer. The receiver
displays an Error message.
The receiver does not display
the program name for a
manual event timer.
114
Possible Reason
• You must enter the password
before you can create an
event timer for a locked
program.
• You must order a Pay-Per-
View event before you can
create an event timer for it.
• You already have set up the
maximum number of event
timers.
• You may have set up a
Reminder but what you should
have set up is an Auto-Tune,
VCR, or Ext.
• You may have set up a timer
with an incorrect frequency.
• You may have several timers
set up for the same time.
• Stopping the event timer
applies only to the current
showing of the program.
• Editing an automatic event
timer converts it to a manual
event timer. Such a timer
starts and stops at the times
you specify, not the start and
stop times of any specific
program.
• You may have tried to set a
manual event timer with
invalid start or stop times.
• The receiver may not be able
to display a program name for
a manual event timer.
What to Do
• To be able to set up an event timer for the
program, first enter the password.
• To be able to set up an event timer for the event,
first order it.
• To be able to set up a new event timer, delete one
of the event timers you set up earlier.
• Remember that a Reminder just reminds you that
the program is about to start. An Auto-Tune timer
reminds you and tunes the receiver to the
program. A VCR timer reminds you, tunes the
receiver, and starts the VCR. An Ext. reminds you
and then starts recording on an external device.
• Remember that a Once event timer operates just
one time. A Mon.-Fri. event timer operates
Monday through Friday on the same channel at
the same time. A Daily event timer does the
same, Monday through Sunday. A Weekly event
timer operates once a week on the same channel
at the same time.
• Delete a timer.
• To stop all operations of a repeated event timer,
you must delete the event timer.
Note: The receiver deletes a Once event timer
when it operates.
• If you want an automatic event timer to start and
stop according to a specific program, avoid
editing that event timer.
• Review the rules on start and stop times for
manual event timers.
• Use the Program Guide or a printed schedule to
find the program name.