Auto Memory Entry; Direct Access Tuning - Kenwood KRC-685R Instruction Manual

Auto Memory Entry
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to 6 frequencies can be stored this way.
1 Select the band for auto memory entry.
2 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
3 Keep pressing the »P1 button until "A-MEMORY' appears in
the display.
Press the kd button to search in the other direction.
4 Press the AM or FM button for least two seconds to start auto
memory function.
The numbers of the preset station buttons showed in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
« When the AF function is turned on while auto memory entry
takes place, only RDS stations ({i.e., stations with RDS
capability) are stored. RDS stations that have been preset for
FM1 cannot also be preset in FM2 or FM3.
« When the local seek function is turned while auto memory
entry takes place, stations with poor reception are not stored.
« When the Traffic Information function is on , only the local
traffic information station frequency will be stored.
Canceling Auto Memory Entry During Its Operation:
Press the MENU button while auto memory entry is taking
place to stop the process.
Function of Remote with number/letter entry buttons
(KCA-R6A : Optional)
Direct Access Tuning
When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.
1 Select the band by pressing the FM or AM button.
2 Press the DIRECT button.
The frequency part of the display blinks for 10 seconds.
If you make no input in the 10-second period, direct access
tuning is automatically canceled.
3 Enter the frequency of the desired station while the display is
blinking.
If you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
{f you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
* When a frequency which cannot be received is input, this
frequency is not verified and operation returns to the original
frequency input mode.
* FM frequencies can only be input in 0.1 MHz steps, and not
0.01 steps.
Canceling Direct Access Tuning:
Press the DIRECT button again.
—13—