Setting The Form Assistant Startup Option - NUANCE OMNIFORM 3 User Manual

The Form Assistant Options
This section gives a brief description of each option in Form Assistant.
Through a series of dialog boxes, the Form Assistant easily steps you
through the process of converting your form into an electronic form.
Scan a Form or Image File
Select Scan a form or image file to scan a paper form or import an image
file and to determine how you will work with the form in OmniForm.
Fill in a Form
Select Fill in a form to fill the currently open form or to open a form and
fill it. See Chapter 6, Filling a Form, for more information.
Print a Form
Select Print a form to print the currently open form or to open a form and
print it.
Search a Form for Information
Select Search a form for information to search the currently open form for
information or to open a form and search it.
Work on a Form's Design
Select Work on a form's design to redesign the currently open form or to
open a form in design view. See Chapter 5, Designing a Form, for more
information.
Create a New, Blank Form
Select Create a new, blank form to open a blank page in design view.

Setting the Form Assistant Startup Option

You can enable or disable Form Assistant at startup. You can deselect
the Show on StartUp on the Form Assistant dialog box and click Close>.
OmniForm will open a blank form the next time you launch it.
Or, if you want the Form Assistant dialog box to show each time you
launch OmniForm, then make sure that the Show on StartUp on the Form
Assistant dialog box is selected.
Using Form Assistant
Form Usage #