Scanner Errors; Other Error Messages - NUANCE OMNIFORM 3 User Manual

For windows 95 and nt
Hide thumbs Also See for OMNIFORM 3:
Table of Contents

Advertisement

Error Messages

Scanner Errors

Other Error Messages

12 Technical Information
If a scanner error message appears, always check scanner connections,
make sure the scanner is not in use by another application, and verify
that your scanner is supported by OmniForm. See Scanner Setup Notes
(included in the OmniForm package) for a list of supported scanners.
Test your scanner in Windows with the manufacturer's software to
make sure that it works properly.
The following messages are listed alphabetically.
All objects within an Option Group must be of the same type.
An Option Group can consist of circle text objects or check box objects.
OmniForm does not allow the same Option Group name to be assigned
to different object types.
Calculation Error: Cannot resolve circular references.
This message appears if two or more fields are logically connected in a
closed loop so that no value can be returned. For example, suppose you
selected the field Cost1 and created this calculation for it:
Sum([Cost1],[Cost2])
A circular reference error message would appear because the selected
field cannot be involved in returning its own sum.
Calculation Error: Invalid Field Name. Correct the field name or
enter another in the expression for [field name].
A field name in your calculation does not exist in the form. It may be
misspelled or it may have been deleted from the form after the
calculation was previously accepted. Correct the field name, add it to the
form if it is missing, or change the calculation.
Calculation Error: Invalid Field used in calculation. [field name1]
cannot be used in the Expression for [field name2].
You used an invalid field, such as a fill graphic, in a calculation. Only fill
text, comb, check box, and circle text fields can be used in calculations.
Calculation Error: Missing ']'.
The calculation is missing a bracket. All field names that contain a space
must be enclosed by brackets. OmniForm does not automatically insert
brackets around a manually created field name that contains a space.
You must bracket these manually.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniform

Table of Contents