Table of Contents
Advertisement
Searching a Form
Using the Search... Command
The field to search
How to search
What to search for
Which records to search
This section describes how to use the Search... command to open a form
in fill view and perform a search. You can also use the Form Assistant
dialog box to search a form. See "Using Form Assistant" on page 3-2.
1
If you have a form open and are in design view, click the Fill
button in the standard toolbar or choose Fill in the View menu.
2
Choose Search... in the Records menu.
The Search dialog box appears
3
Select the field to search in the Field Name drop-down list.
4
Select how to search for the information in the Condition drop-
down list.
5
Type the information to find in the Value text box.
6
Select which records to search.
• Select Search All Records in the Database to search all records in
the current database.
• Select Only Search Current Record Set to search the current
found set of records. This option is only available after a
search.
7
Click OK.
OmniForm searches the records and finds any that contain the
information you specified.
See "Searching Records for Information" on page 7-7 for detailed
information on searching.
Searching a Form
OmniForm Procedures 11
Advertisement
Table of Contents
