3.11
SETTINGS
3.12
PASSWORD
3.13
SAVE
3 DISPLAY PANEL OPERATION
ID
Choose
ON / OFF
Reset to Factory?
This function will reset all setting to the original factory setting
Up load custom?
Select
Up load custom?
MASTER unit to the SLAVE units
COLOR
is f ora ctivate/unactivatet hec olorc alibrationf unctions. When
[UC] is selected, the RGB output are adjusted to a standard preset universal
color which balances fixtures from different generations..
The factory default setting is [UC] on.
PASSWORD
Enter the PASSWORD mode to select whether the access password is on or off.
When the fixture is set as PASS
time, the fixture will need an access password to enter the display menu control.
Note: The factory access password is UP + DOWN + UP + DOWN , then
press
ENTER to confirm the access.
Only the main menu and the Auto-programs submenu can be protected
Repower the unit, it will back to the main menu
to open or close ID
to upload the custom programs from the current
ON , after 30 seconds or turn on the fixture next
12
2009.12.9
Need help?
Do you have a question about the LED MINI PAR - V2.1 and is the answer not in the manual?