Preparing For Installation; Verifying Package Contents; Gas Supply Requirements; Gas And Electric Requirements Table - Electrolux E48DF76EPS - 48" Pro-Style Dual-Fuel Range Installation Instructions Manual

Dual fuel ranges

Hide thumbs Also See for E48DF76EPS - 48" Pro-Style Dual-Fuel Range:

Specification sheet (2 pages)

Wiring diagram (1 page)

Table Of Contents

Table of Contents

VERIFY PACKAGE CONTENTS

• Use & Care Manual

• Broiler Pan/Insert

• Anti-tip Bracket

• Grate Pack

• Griddle

• LP Conversion Kit

GAS SUPPLY REQUIREMENTS

Check your local building codes for the proper method of installation. In the

absence of local codes, this appliance should be installed in accordance with the

National Fuel Gas Code ANSI Z223.1. Be certain that the appliance being installed

is correct for the gas service being provided. Refer to the rating label located on the

kick panel and/or the table below for gas supply requirements.

GAS AND ELECTRIC REQUIREMENTS TABLE

Refer to the following table for more information on gas and electric requirements.

NOTE

This range is shipped from the factory pre-set for use with natural gas. For LP

conversion see the accompanying LP Conversion Kit. The electrical information in the

table is also located on the serial number label on the range. It can be found by

opening the oven door and looking through the inlet air cooling grill.

Model No.

Electrical

circuit

required

240-4

E30DF74EPS

Wire VAC,

60Hz, 30A

240-4

E36DF76EPS

Wire VAC,

60Hz, 30A

240-4

E48DF76EPS

Wire VAC,

60Hz, 50A