Removing The Door(S); Reinstalling The Door(S) - Electrolux E48DF76EPS - 48" Pro-Style Dual-Fuel Range Installation Instructions Manual

18
Installation
REMOVING THE OVEN DOOR(S)
WARNING WARNING WARNING
WARNING WARNING
Do not attempt to disengage the hinge catches with the door removed from the oven.
The hinge springs could release causing personal injury.
Do not lift or carry the oven door by the door handle.
Open the door to its fully opened position. Rotate the catch over the retaining arm
on each hinge. Lift the oven door to about a 30 degree angle from the horizontal
position. Pull the door away from the oven while continuing to lift.
Figure 13
To remove
oven door,
rotate catch
as shown.
RE-INSTALLING THE OVEN DOOR(S)
Grasp the oven door on opposite sides and lift it until the door hinges are aligned
with the openings in the oven frame. Holding the door at about a 30° angle from the
horizontal, slide the hinges into the openings until the bottom hinge arms drop fully
into the hinge receptacles. Lower the door to the fully opened position, and then
rotate the two hinge catches toward the oven.
Open and close the door completely to ensure that it is properly installed.
Peel off the protective layer of plastic that covers the door panel.
Removing the Oven Door