Electrolux E48DF76EPS - 48" Pro-Style Dual-Fuel Range Installation Instructions Manual page 25

Liquid Petroleum Gas (LPG) Conversion Kit
E30DF74EPS, E36DF76EPS, E48DF76EPS
WARNING:
This conversion kit shall be installed by a qualified service agency in accordance
with the manufacturer's instructions and all applicable codes and requirements of
the authority having jurisdiction. If the information in these instructions is not
followed exactly, a fire, explosion, or production of carbon monoxide may result
causing property damage, personal injury, or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not
proper and complete until the operation of the converted appliance is checked as
specified in the manufacture's instructions supplied with the kit.
CAUTION:
Before proceeding with the conversion, shut off the
gas supply to the appliance prior to disconnecting the
electrical power.
Do not reconnect electrical power until all leak tests
have been performed.
IMPORTANT:
Read and save these instructions for future use and
for use by the building inspector.
The range will not operate properly unless the correct
sized orifices and air shutters are installed for each
burner and valve and the air shutters for each burner
are properly adjusted.
Instructions
Freestanding Range Models:
Part No. 65558 Rev. 1-4
Professional series
Model E30DF74EPS shown
Only a qualified service technician should convert or
service this appliance.
Be sure the unit is unplugged and cool before
proceeding with the conversion.
The range will not operate properly unless the
regulator is converted according to these instructions.
After installing the LPG orifices, be sure to keep the
original factory installed orifices for future conversion
back to natural gas. See page 12 for instructions on
how to convert this appliance to nature gas from
LPG.