Electrolux E48DF76EPS - 48" Pro-Style Dual-Fuel Range Installation Instructions Manual page 30

STEP 6 Replace Bypass Orifices
6-1 Make sure all knobs are in the off position.
6-2 Remove all of the burner knobs from the front of
the range.
6-3 Insert the 1/8" screwdriver into the valve stem
hole for the left rear burner. Unscrew the bypass
orifice from the right side of the valve assembly.
6-4 Identify the appropriate bypass orifice from
Table 6-1. Match both the model number and
Bypass Orifice
Burner E30DF74EPS
Location (30-Inch)
Left Rear 61
Left Front 48
Right Rear 61
Right Front 61
Center Rear -
Center Front -
Table 6-1 Bypass Orifice Sizes (x 100 mm)
Valve Assembly
Figure 6-1 Bypass Orifice Conversion
the burner location. The bypass orifice size is
stamped on its head.
6-5 Insert the bypass orifice and the attached o-ring
into the right side of the valve with the needle
nose pliers. Tighten into place with the 1/8"
screwdriver.
6-6 Repeat steps 6-1 through 6-5 for the remaining
burner valves.
6-7 Replace the knobs.
E36DF76EPS
(36-Inch)
61
48
48
61
61
61
Valve Stem Hole
Page 6
E48DF76EPS
(48-Inch)
61
48
48
61
61
61