Installing The Cooling Shroud - Dell PowerVault NX3500 Hardware Owner's Manual

Figure 2-8. Removing and Installing the Cooling Shroud
1 power distribution board shroud
3 tabs (2)

Installing the Cooling Shroud

CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Orient the cooling shroud with the numbered fan bays as a guide.
2 Align the cooling shroud posts with the slots on the system board.
3 Push the cooling shroud down until all edges are secured to the system
board.
4 Close the system. See "Opening and Closing the System" on page 52.
1
4
2
4
Installing System Components
3
system board shroud
fan bay numbers
2
63