Troubleshooting The Processor; Troubleshooting A Wet System - Dell PowerVault NX3500 Hardware Owner's Manual

Troubleshooting the Processor

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product
1 Run the appropriate online diagnostics test. See "Embedded System
Diagnostics Features" on page 105.
2 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
3 Open the system. See "Opening the System" on page 52.
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 62.
5 Ensure that the processor and heat sink are properly installed.
See "Processor" on page 73.
6 Close the system. See "Closing the System" on page 53.
7 Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
8 Run the appropriate online diagnostic test.
If a problem is still indicated, see "Getting Help" on page 113.

Troubleshooting a Wet System

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product
1 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
2 Open the system. See "Opening the System" on page 52.
102
Troubleshooting Your System
Many repairs may only be done by a certified service technician.
Many repairs may only be done by a certified service technician.