Table of Contents
Advertisement
Step 1: Install the Software
Xerox 6400 Scanner User's Guide
Installation
Installation is a quick, three-step process:
1. Install the software
2. Connect the USB cable to your computer
3. Connect and power on the scanner
NOTE:
You must install the PaperPort software before
connecting the scanner to the computer. Otherwise the correct
software to run your scanner will not be installed and it may not
scan properly.
To install the software:
1. Start Microsoft Windows and make sure no other applications
are running.
2. Insert the installation CD into your computer's CD-ROM drive.
The CD automatically starts.
NOTE:
If the CD does not start, check the following:
•
Make sure the CD drive's door is completely shut.
•
Open Windows Explorer and double-click the icon for your
CD-ROM drive. From the list of files on the CD, double-click
the file named START32.EXE.
Installation
5
Advertisement
Table of Contents
