Remote Valet; Remote Start - Directed Electronics 1500ESP Owner's Manual

Directed electronics remote start alarm system owner's guide 1500esp

Hide thumbs Also See for 1500ESP:

Table of Contents

Remote Valet

You can also activate Valet

1. Open any vehicle door.

2. Press

3. Press

4. Press

again.

The status LED will light solid if you are entering Valet

will turn off if you are exiting Valet

This feature allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the

vehicle.

IMPORTANT! (1) Never remote start your vehicle when the keys are in the

ignition, except when performing Valet

the vehicle if it is not in either PARK or NEUTRAL.

Pressing

and

sequence. The parking lights will flash to warn that the motor is

about to start. It is important to release the transmitter buttons

as soon as the parking lights flash. If the buttons are pressed

longer than two seconds, the remote start sequence will stop.

1999 Directed Electronics, Inc.

Mode using the remote transmitter:

Mode.

Take-Over, and (2) Never start

at the same time will begin the remote start

Mode and

Table of Contents