Silent Mode - Directed Electronics 1500ESP Owner's Manual

Directed electronics remote start alarm system owner's guide 1500esp

Hide thumbs Also See for 1500ESP:

Table of Contents

To disarm the security system,

turn the ignition key on and

press the Valet

preset number of times within

15 seconds. If the system does

not disarm, you may have

waited too long; turn the igni-

tion

process.

IMPORTANT! The Valet

presses for the disarm function. You must check with the installer to ver-

ify the programming for your individual unit.

LOCATION OF VALET

Silent Mode

Use the Silent Mode to temporarily turn off the arm or disarm con-

firmation chirps by briefly pressing

disarming the security system. The confirmation chirp(s) will then

be eliminated for that one operation only. To permanently turn off

the arm and disarm confirmation chirps, contact your installation

dealer.

NOTE: The Warn Away

tem is armed using the Silent Mode. This ensures that the siren does not

chirp in an environment where you don't want chirps to be emitted. The

system is still capable of being triggered by heavier impacts; only the

Warn Away

Response generated by light impacts is bypassed.

1999 Directed Electronics, Inc.

switch the

off

and

repeat

switch can be programmed to respond to 1-5

SWITCH_____________________________

before either arming or

Response to lighter impacts is bypassed if the sys-

DRW-35

the

Table of Contents