High Frequency; Owner Recognition - Directed Electronics 1500ESP Owner's Manual

Directed electronics remote start alarm system owner's guide 1500esp

Hide thumbs Also See for 1500ESP:

Table of Contents

trol unit and fail to operate the system. To re-sync the remote sim-

ply press

several times within range of the vehicle. The alarm

will automatically re-sync and respond to the transmitters normally.

High Frequency

Your system transmits and receives at 434 MHz. This provides a cleaner

spectrum with less interference and a more stable signal. Enjoy a phe-

nomenal increase in range, even in areas with high radio interference.

Owner Recognition is a revolutionary new feature available only

from DEI

. Using a DEI

dealer can program many of the system settings. The programmer

makes it possible to program different settings for each transmit-

ter that is used with the system. Then, whenever a specific trans-

mitter is used, the system will recall the settings assigned to that

transmitter. Owner Recognition lets up to four users of the system

have different settings that meet their specific needs. It is almost

like having four separate alarms in your vehicle, one for each user.

NOTE: Owner Recognition cannot be programmed without a Bitwriter and

the necessary software. Check with your dealer for more information.

1999 Directed Electronics, Inc.

Bitwriter, hand-held programming tool, your

Table of Contents