Starter Anti-Grind Circuitry; Diagnostics; Arming Diagnostics - Directed Electronics 1500ESP Owner's Manual

Directed electronics remote start alarm system owner's guide 1500esp

Hide thumbs Also See for 1500ESP:

Table of Contents

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind cir-

cuitry will prevent the starter from engaging, even if the key is

turned to the start position. This prevents damage to the starter

motor if the key is turned to the start position during remote start

operation.

NOTE: The starter anti-grind circuitry only works when the remote start

system is operating the motor and the Failsafe

installed.

The microprocessor at the heart of your system is constantly mon-

itoring all of the switches and sensors connected to it. It is

designed to detect any faulty switches and sensors and prevents

them from disabling the entire system. The microprocessor will also

record and report any triggers that occurred during your absence.

If the security system is armed at the same time that an input is

active (such as a door opening or sensor triggering), you will hear

one siren chirp to indicate arming and a second siren chirp to indi-

cate Bypass Notification. A Bypass Notification chirp means that

the security system ignores the input that was active when the

system was armed, until that input ceases. Three seconds after

Starter Kill relay has been

1999 Directed Electronics, Inc.

Table of Contents