Remote Valet; Remote Start - Directed Electronics Automate 553 Owner's Manual

To enter or exit Valet
use the same procedure:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the
The status LED will light steadily to indicate that you have
entered Valet ® Mode and will turn off when you have exited Valet
Mode.

Remote Valet

You can also activate Valet
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light solid if you are entering Valet
will turn off if you are exiting Valet

Remote Start

This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehi-
cle with the climate control system. If interior heating or cooling
14
® Mode
Valet ® switch within 10
seconds.
® Mode using the remote transmitter:
® Mode.
DRW-35
® Mode and
1999 Directed Electronics, Inc.
©
®