To Use The Machine As A Network Printer (Network Connection); Step 1 Specifying Network Settings - Canon Color imageCLASS 8180c Software Manual

To Use the Machine as a Network Printer (Network
Connection)
IMPORTANT
The machine needs to be restarted for the specified settings to become effective. To
restart the machine, disconnect the power cord, wait for at least 10 seconds, and connect
1
the power cord again.
NOTE
•
For details on specifying network settings, refer to Chapter 2, "Specifying the Network
Settings," in the Network Guide.
•
For additional network protocol settings, refer to the Network Guide.
•
For the values of the network settings, consult your network administrator or internet
service provider (ISP).

Step 1 Specifying Network Settings

NOTE
•
The machine is set to IP ADDRESS AUTO by default. If you are using DHCP you do not
need to make any changes and can move to "Step 2 Connecting the Machine to a
Network," on p. 1-15.
1
Press [Menu] ➞
on the LCD ➞ press [Set].
MENU
2
Press
3
Press
LAN SETTINGS
1-12 Installing Software on Your Computer
6.NETWORK SETTINGS
to select <1.LAN SETTINGS> ➞ press [Set].
or
NETWORK SETTINGS
1.LAN SETTINGS
to select <1.IP ADDRESS AUTO.> ➞ press [Set].
or
1.IP ADDRESS AUTO.
or to select <6.NETWORK SETTINGS>