Canon Color imageCLASS 8180c Software Manual page 79

[Position] Specifies the position where the watermark is printed on each page. You
can enter the values in the [X] and [Y] edit boxes (in a range between
–50 and 50), or use the X and Y slide bars to move the position.
[Move to Center] Relocates the watermark to the center of the page.
[Angle] Sets the angle of watermark. You can select the corresponding radio
button, or use the slide bar to move the angle, or enter a desired value in
the [Set Angle] edit box (in a range between -180 and 180).
[Name] Displays the name of the currently selected watermark.
[Text] Displays the text string of the currently selected watermark.
[Font] Selects the font type of the watermark.
[Style] Selects the font style of the watermark. Available styles are [Regular],
[Italic], [Bold], and [Bold Italic].
[Size] Specifies the font size of the watermark (1 to 500).
[Color] Selects the font color of the watermark.
[Border] Adds the frame to the watermark. You can select the frame type
([Circle], [Square], or [None]).
[Print Style] Selects the type of watermark ([Transparent] or [Overlap]).
[Print on First Page Only]
Prints the selected watermark only on the first page of the document.
■ Custom Paper Size Settings
Clicking [Custom Paper Size] in the [Page Setup] tab sheet opens the [Custom
Paper Size Settings] dialog box. This dialog box enables you to define custom
paper sizes for quick selection and register new custom paper sizes to the [Paper
List] box. You can specify the name, width, and height of each size.
NOTE
This setting is available only when you open the [Canon MF8100 Series Printing
Preferences] dialog box from the [Printers and Faxes] folder (in Windows 98/Me/2000,
[Printers]). It depends on software application, you may specify the setting from the
Document properties dialog box (Software application).
Windows 2000/XP/Server 2003 Properties and Printing Preferences
2
2-43