Mode Button Settings In Br-Script 2 Mode - Brother HL-2400C Service Manual

USER'S GUIDE
Mode Menu
INTERFACE MODE
Same as HP PCL5C Mode
FORMAT MODE
RESOLUTION MODE
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has not been formatted:
CARD1
CARD2
exit
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has been formatted:
CARD1 EXECUTE DATA
CARD2
4–12

MODE Button Settings in BR-Script 2 Mode

The following table shows all the selections you can make with the Mode
button in the BR-Script 2 mode.
Note
The mode menus and settings that can appear vary according to the
current emulation mode, printer status, and any options that may be
installed in the printer.
Setting Menu Sub-Setting Menu
PAGE FORMAT MODE PAPER=LETTER
(For 120V model)
PAPER=A4
(For 220/240V model)
X OFFSET=0
Y OFFSET=0
exit
COLOR MODE Same as PCL5C mode
exit
RESOLUTION RESOLUTION=600
CAPT SETTING CAPT=ON
HRC SETTING HRC=MEDIUM
exit
FORMAT CARD
exit
DATA ID=#####
CARD LIST
SAVE SAVE DATA
exit
DELETE MACRO ID=#####
DATA ID=####
FONT ID=#####
FORMAT CARD
exit
Setting
LETTER, LEGAL, A4, A5, B5,
JIS B5, EXECUTIVE, COM10, C5
and DL
-500 (left) to +500 (right) dots
-500 (down) to +500 (up) dots
Exit to PAGE FORMAT MODE
Exit to PAGE FORMAT MODE
300 or 600 dpi
ON or OFF
OFF, LIGHT, MEDIUM, or DARK
Exit to RESOLUTION MODE
Format the flash memory card or
the HDD card.
Exit to CARD OPERATION
CARD 1 (2)
Execute the data on the card.
Execute the selected data.
Print the contents of the card.
Send data to be saved.
SET KEY--> END End saving the data.
DATA ID=##### Set data ID for saved data.
Exit to CARD OPERATION
Delete the selected macro.
Delete the selected data.
Delete the selected font.
Format the card.
SET –> DELETE ALL Execute formatting the card.
exit Exit to FORMAT CARD
OPERATION
Exit to CARD 1(2) OPERATION