Form Feed Suppress
You can turn on or off the form feed suppress function in this mode menu
as follows:
Display Message
FF SUPPRESS=OFF
FF SUPPRESS=ON
If pages contain no print data, the printer would normally print blank
pages. When you turn this function on, you can suppress printing blank
pages.
When the printer is used in a network environment, it may deliberately
print a blank page at the end of each print job. When you turn on this
function, the printer does not print blank pages.
ERROR PRINT
Note
The setting in this mode menu is effective only in the BR-Script 2 mode.
It does not appear in any other emulation modes.
You can turn on or off the error print in this mode.
Display Message
ERROR PRINT=ON
ERROR PRINT=OFF
CHAPTER 4 CONTROL PANEL
Form Feed Suppress
Turn off the form feed suppress function.
(Factory setting)
Turn on the form feed suppress function.
Error Mode
Turn on the error print so that the printer
prints an error if it occurs.
Turn off the error print so that the printer
does not print an error if it occurs. (Factory
setting)
4–43