Test Button - Brother HL-2400C Service Manual

TEST Button

You can test the printer or print out the list of fonts with the Test button.
To do so, hold down the Shift button and press the Test button. You will
then enter test mode where you may test the printer or print out the list of
fonts.
To test the printer, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Test button.
When you enter test mode, the display shows the first test mode item.
3. Press the
display.
or button until the desired test mode appears on the
Display Message
DEMO PAGE
TEST PRINT
PRINT CONFIG
PRINT FONTS I
PRINT FONTS C
PRINT FONTS P
exit
CHAPTER 4 CONTROL PANEL
Test Mode
Prints out the demonstration.
Performs the printer test and prints
out the test pattern.
Prints out the list of panel button
settings you have configured for
the printer as user settings.
Prints out the list of internal or
resident fonts.
Prints out the list of optional fonts
stored in the font cartridge/card.
Prints out the list of permanent
download fonts.
Exits from the test mode. The
printer does not perform the test.
4–75