Advertisement
MODE Switch Settings in BR-Script 2 Mode
The following table shows all the selections you can make with the MODE
switch in the BR-Script 2 mode.
Note
The mode menus and settings that can appear vary according to the current
emulation mode, printer status, and any options that may be installed in the
printer.
Mode Menu
Setting Menu
INTERFACE MODE
Same as HP LaserJet 4+ Mode
(See 4-17.)
FORMAT MODE
X OFFSET=0
(See 4-22.)
Y OFFSET=0
exit
RESOLUTION MODE
RESOLUTION
(See 4-28.)
APT SETTING
HRC SETTING
exit
CARD OPERATION
When the commercial flash memory card or the HDD card has not been formatted:
(See 4-32.)
FORMAT CARD
exit
CARD OPERATION
When the commercial flash memory card or the HDD card has been formatted:
(See 4-32.)
EXECUTE DATA
CARD LIST
SAVE
DELETE
exit
Sub-Setting Menu
RESOLUTION=600
APT=OFF
HRC=MEDIUM
DATA ID=#####
exit
SAVE DATA
SET KEY--> END
DATA ID=#####
exit
MACRO ID=#####
DATA ID=####
FONT ID=#####
FORMAT CARD
SET –> DELETE ALL
exit
CHAPTER 4 CONTROL PANEL
Setting
-500 (left) to +500 (right) dots
-500 (up) to +500 (down) dots
Exit to PAGE FORMAT MODE
300 or 600 dpi
ON or OFF
OFF, LIGHT, MEDIUM, or DARK
Exit to RESOLUTION MODE
Format the flash memory card or
the HDD card.
Exit to CARD OPERATION
Execute the data on the card.
Execute the selected data.
Exit to EXECUTE DATA
Print the contents of the card.
Send data to be saved.
End saving the data.
Set data ID for saved data.
Exit to CARD OPERATION
Delete the selected macro.
Delete the selected data.
Delete the selected font.
Format the card.
Execute formatting the card.
Exit to FORMAT CARD
OPERATION
Exit to CARD OPERATION
4–11
Advertisement
