Paper Feed Roller / Separator Pad - Brother HL-2400C Service Manual

4.6.4

Paper Feed Roller / Separator Pad

1) Remove the media cassette.
2) Remove the set screws ST3X6 (2 pcs.) from the paper guide (L).
3) Remove the paper guide (L).
4) Remove the set screws ST3X6 (2 pcs.) from the paper guide (UR).
5) Remove the paper guide (UR).
6) Disconnect the harnesses (2 pcs.) connected to the OHP sensor and paper empty
sensor.
7) Remove the paper feed roller by pushing it to the right viewed from the rear of the
printer.
8) Pull up and remove the separator pad.
Do not touch the surface of the paper feed roller and separator pad.
Paper Feeding
Roller
Paper guide (UR)
Paper guide (L)
Fig.7-71
Separator Pad
Fig.7-72
PRECAUTION
VII-42