Brother HL-2400C Service Manual page 252

Display Message
14 CHK CLEANING
ROLLER
15 MISPRINT
PAPER/PRREQ/MEDIA
16 ALIGN TONER CG
Y/M/C/K
16 ALIGN FU UNIT
16 ALIGN BELT CG
17 MEDIA JAM FEED
17 MEDIA JAM INNER
17 MEDIA JAM OUTER
17 MEDIA JAM DRUM
18 CLOSE PANEL
FRONT/TOP
18 CLOSE TR UNIT
19 SLEEP MODE
01 WAIT
00 READY
02 PRINT
Meaning
Change the fuser
cleaner
Misprinting occurred
Toner cartridge not
installed
Fusing unit not
installed
OPC belt cartridge not
installed
Paper jam at feeding
area
Paper jam inside
printer
Paper jam at paper
exit area
Paper jam wound
around the transfer
drum
Covers open
Transfer unit open
Printer under idling
condition
Printer warming-up
Printer ready to print
in standby status
Printing in progress
VIII-7
Countermeasure
Replace with a new fuser
cleaner
Confirm status of media
cassette.
Confirm correct paper size.
Confirm consistency of
media.
Confirm the installation of the
toner cartridge(s).
Remove the fusing unit and
refit it. Confirm it is correctly
installed.
Confirm the installation of the
OPC belt cartridge.
Remove the media cassette,
and remove paper jammed at
feeding entrance.
Open the transfer unit, and
remove paper jammed inside.
Open the transfer unit / paper
exit unit and remove paper
jammed inside.
Open the transfer unit and
remove the OPC belt
cartridge. Remove the paper
jam by unwinding the paper
from the transfer drum.
Confirm that the covers are
firmly closed.
Confirm that the transfer unit
is firmly closed.
Printer automatically returns
to the operating condition
when a PRINT signal is sent.
These are normal operation
modes.