CHAPTER 2
SETTING UP THE PRINTER
This chapter works as a quick setup guide, which gives you information for setting up
the printer.
BEFORE USING THE PRINTER
Checking the Components
Printer
Standard Media
Cassette
(pre-installed)
Oil Bottle
Oil Syringe
User's Guide
Warning
This printer is heavy and weighs approximately 36kg (79.37lbs).
When you move or lift this printer, be sure to do so with at least 2
people so that you will not hurt your back.
After unpacking the printer, check to see that you have all of the
following parts.
Fig. 2-1 Components in the Printer Carton
!
Caution
The Toner Cartridges, (OPC) Belt cartridge, Oil Bottle and Fuser Cleaner
are packed inside a separate carton as a starter kit. Do not open them now.
Only open them immediately before you want to install them. The (OPC)
Belt Cartridge must not be exposed to light for a long time or damage will
occur.
CHAPTER 2 SETTING UP THE PRINTER
(OPC) Belt
Cartridge
Fuser Cleaner
Power Cord
Toner Cartridges
(Black, Cyan,
Magenta and
Yellow)
Printer Driver
Disks
2–1