Stateful Srp Switchover (High Availability); Release Software Protocols; Core Routing Stack; Network Management Protocols - Juniper JUNOSE SOFTWARE 11.0.1 - RELEASE NOTES 7-14-2010 Release Note

Stateful SRP Switchover (High Availability)

Release Software Protocols

The following list identifies the major software protocols supported in this release.
For detailed information about any protocol, see the configuration guides.

Core Routing Stack

Network Management Protocols

Routing Protocols

Stateful SRP Switchover for Certain Applications
The stateful SRP switchover feature has not been qualified for the following
applications:
Remote Access
DHCP proxy client
L2TP dialout
Internet Protocol (IP) version 4 and version 6
Transmission Control Protocol (TCP) for IPv4
User Datagram Protocol (UDP) for IPv4 and IPv6
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3
Border Gateway Protocol (BGP-4)
Distance Vector Multicast Routing Protocol (DVMRP)
Internet Group Membership Protocol (IGMP)
Intermediate System–to–Intermediate System (IS-IS)
Layer 2 Virtual Private Networks (L2VPNs)
Mobile IP
Open Shortest Path First (OSPF) version 2 and version 3
Protocol Independent Multicast Protocol (PIM), including PIM dense mode, PIM
sparse mode, PIM dense-sparse mode, and PIM source-specific multicast
Routing Information Protocol (RIP) version 2
Virtual Private LAN Service (VPLS)
Virtual Router Redundancy Protocol (VRRP)
Release 11.0.1
Release Software Protocols
11