Pstn Phone Calls; Making Pstn Call; Receiving Pstn Call; Transferring Pstn Call - D-Link DPH-70 User Manual

Modem ip phone

Hide thumbs Also See for DPH-70:

Table of Contents

DPH-70 User's Guide

5 PSTN Phone Calls

DPH-70 can make and receive normal PSTN phone calls. When DPH-70 is not connected to the

Internet through the DIAL-UP button (RECEIVE state), it is known to be in idle state. In this state

it works as a normal phone, making and receiving PSTN phone calls. This feature does not need

any configuration.

To make an outgoing call, go off hook and dial the destination number, followed by #. For

example, you press 12345# to call 12345 through PSTN network. It plays various call progress

tone as in normal phone and plays ring back tone if the called party is free. DPH-70 establishes

the call on called party attending the call.

To make PSTN call in pulse mode, press SHIFT key and dial the phone number. For example,

press <SHIFT> 12345# to dial 12345 in pulse mode.

The dialing mode of PSTN number depends upon configuration of ISP number. If ISP number is

configured with & (for BLIND DIALING), PSTN number is also dialed in blind mode, and if ISP

number is configured with $ (for PULSE MODE DIALING), PSTN number is also dialed in pulse

不參來

mode. (Please refer section

DPH-70 has special supports for operation behind an EPABX. For example, you may have to dial

9 to get external dial tone and then dial the destination number. In this scenario, first dial '9#' to

dial to EPABX and get external dial tone, then dial the destination number.

Warning:

DPH-70 identifies end of phone number by '#'. Please terminate phone number entry

by pressing '#' key. If you don't press any key for more than 5 sec, DPH-70 identifies it as end of

phone number.

DPH-70 can receive any normal PSTN phone call when DPH-70 is not connected to the Internet

through the DIAL-UP button. It rings on incoming call and establishes call on off hook. Either

party can disconnect the call by going on hook.

This feature allows the user to transfer a PSTN phone call to any PSTN phone. To transfer the

call, you flash the hook for a short period and dial the destination number followed by '#'. The

destination number will ring and on off-hook the call transfer will be complete.

Table of Contents