Additional Features; Upgrading Software; Loading Factory Defaults - D-Link DPH-70 User Manual

Modem ip phone

Hide thumbs Also See for DPH-70:

Table of Contents

DPH-70 User's Guide

7 Additional Features

DPH-70 has a facility to upgrade the software, remotely through the Internet at no cost to you.

Software can be downloaded when the phone is in RECEIVE state or when not in use.

On pressing '∗456∗#', the phone connects to the Internet and downloads the software. During the

download process, DPH-70 will play progress tone and blink the SHIFT LED. After successful

download, the phone restarts with the newer software. Due to some reason if download fails, the

phone will continue working with the earlier software. You can check the current software version

through configuration menu.

D-Link will release latest DPH-70 software in its website at

http://www.dlink.co.in

along with the

server IP address from where the latest software can be downloaded. This information is required

to be entered into DPH-70 through the configuration menu.

Note: On pressing '*456*#', DPH-70 will ask for confirmation.

If it is required to reset DPH-70 and start with default configuration parameters, you can do so by

pressing '∗789∗#' while DPH-70 is in idle state. The phone restarts in few seconds with the

default parameters. Default configuration password is '12345'. The phone needs to be configured

again for Internet access and calling card information before it can be used.

Note: On pressing '*789*#', DPH-70 will ask for confirmation.

Table of Contents