Pstn Phone Calls; Making Pstn Call; Receiving Pstn Call; Transferring Pstn Call - D-Link DPH-70E User Manual

Hide thumbs Also See for DPH-70E:

Table of Contents

DPH-70E User's Guide

6 PSTN Phone Calls

DPH-70E can make and receive normal PSTN phone calls. When DPH-70E is not connected to

the Internet through the VoIP button (RECEIVE state), it is known to be in idle state. In this state it

works as a normal phone, making and receiving PSTN phone calls. This feature does not need

any configuration.

To make an outgoing call, go off hook and dial the destination number, followed by ENTER. For

example, you press 12345 ENTER to call 12345 through PSTN network. It plays various call

progress tone as in normal phone and plays ring back tone if the called party is free. DPH-70E

establishes the call on called party attending the call.

The dialing mode of PSTN number depends upon configuration of ISP number. If ISP number is

configured with & (for BLIND DIALING), PSTN number is also dialed in blind mode, and if ISP

number is configured with $ (for PULSE MODE DIALING), PSTN number is also dialed in pulse

mode.

DPH-70E has special supports for operation behind an EPABX. For example, you may have to

dial 9 to get external dial tone and then dial the destination number. In this scenario, first dial '9

ENTER ' to dial to EPABX and get external dial tone, then dial the destination number.

Warning:

DPH-70E identifies end of phone number by ENTER . Please terminate phone

number entry by pressing ENTER key. If you don't press any key for more than 5 sec, DPH-70E

identifies it as end of phone number.

DPH-70E can receive any normal PSTN phone call when DPH-70E is not connected to the

Internet through the VoIP button. It rings on incoming call and establishes call on off hook. Either

party can disconnect the call by going on hook.

This feature allows the user to transfer a PSTN phone call to any PSTN phone. To transfer the

call, you flash the hook for a short period and dial the destination number followed by ENTER .

The destination number will ring and on off-hook the call transfer will be complete.

Table of Contents