Lan Setup - D-Link AMPLIFI DAP-1525 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
Device Name:
Enter the Device Name of the AP. It is recommended
to change the Device Name if there is more than one
D-Link device within the subnet.
LAN Connection Use the drop-down menu to select Static IP.
Type:
IPv4 Address:
If you change the IP address, once you click Save
Settings, you will need to enter the new IP address in
your browser to get back into the configuration utility.
Subnet Mask: Enter the subnet mask. The default subnet mask is
255.255.255.0.
Default Gateway: Enter the default gateway IP address.
Primary DNS
Server:
Enter the primary DNS server IP address.
Secondary DNS Enter the secondary DNS server IP address.
Server:
My IPv6
Use the drop-down menu to select the IPv6 mode
Connection is: connected to the IPv6 Internet.
D-Link DAP-1525 User Manual

LAN Setup

24